MacFi-mp and MacFi-mpe
MP3 Digital Audio Record/Play System

MacFi-mp Spec(PDF)
MacFi-mpe Photo
MacFi-mp Manual(512K)
MacFi-mp Quikey(65K)
MacFi-mpe Addendum(145K)
MacFi-mpe Quikey(52K)

•MPEG 1, Layer 3 (MP3) record and playback •Local Record Capability •User-friendly controls •99 independent messages
(01 - 99) •Instantaneous, random access of messages •Flash memory, no battery backup required •DML - Dynamic Message Length •Line and microphone inputs •Line and speaker outputs •Shock and vibration resistant •Several playback modes •Playing relay •Rack mount kits available as an option

MacFi-mpe Version Adds:
•Serial (RS-232) control, setup and audio file transfer •MPEG 1, Layers 1, 2 & 3 playback capability •Synchronization relay for sequencing applications •Front mount LED indicators and manual controls for convenience in rack applications with optional rack mount kit

Minimac
Compact Audio Message Repeater

Minimac Spec(PDF)
Minimac Manual(131K)
Minimac Quikey(17K)

•On board recording capability ▪Compact size, just 6.7 W x 3.2H x 1.3D ▪Up to 8kHz bandwidth ▪Crystal clear 16 bit PCM coding ▪Line level input ▪Microphone input ▪Line level output ▪Speaker output(4 watts, 10 watt option) ▪Playing relay ▪Multi-message(4) sequencing capability ▪4 minute capacity ▪Non-Volatile FLASH memory ▪Rugged enclosure

M2 SERIES
HIGH FIDELITY MULTI-CHANNEL DIGITAL AUDIO PLAYER

M2 Spec
M2 Manual(668K)

•MPEG 1, Layer 2 audio for scaleable fidelity from voice(7kHz) to CD(20kHz) quality •Balanced audio output(up to 2 stereo channels) •Removable PCMCIA FLASH Memory •Composer software allows memory cards to be created from .WAV files •Shock and vibration resistant •Contact Closure and RS232 Control •Standard, Retrigger, Play Once and Play While Active modes •Playing relay contact(Form C) •Various configurations available

INPUT CONTROL MODULE (ICM-25)
25 Inputs, RS-232(Serial) Output

ICM-25 Image
ICM-25 Spec
ICM-25 Manual(222K)

•25 discrete message start contacts ▪Multiple modules can be linked to provide up to 50 discrete message start contacts ▪All inputs are optically coupled ▪Status indicators to show activation of each input ▪RS-232 communication to host unit and other ICM units with both upstream and downstream status indicators ▪The configuration mode, including number of plays and repeats, programmed on the host unit will be used by the ICM chain ▪12VDC power which can be sourced from the host unit or supplied by optional transformer ▪Versions available for the MacFi-mpe and M2 Series products

MICROWAVE SENSOR (MS-2)
Simple, Compact, Concealable Message Triggering

MS-2 Spec
MacFi Wiring(12KB)
Minimac Wiring(10KB)

•Small Form Factor(3" W x2.7" H x 0.5" D) •Minimal Power Requirement •Microwave Technology •Does Not Require Line of Site • Adjustable Sensitivity

COMPACT SPEAKER (CS4)
Small Speaker Offers Power and Clarity

CS4 Spec

•Small form factor(4.6" W x 2" H x 2.3" D) •8 Watt output •8 ohm impedance •100Hz - 10kHz Frequency Range •Swivel Mounting •Weather Resistant •6' Cord

MPC CARD READER
Add PCMCIA card Read/Write Capability to your PC

•USB 1.1, 600-800KB/sec transfer rate •5 VDC power supplied by USB port • Plug and Play •Hot swapping •Supports ATA data storage PCMCIA cards, Type II •Windows 98, 98SE, ME, 2000, XP and Mac OS 8.5 drivers